Stock code
839391
language
MgO and MgO-CaO series dry spray grouts
The product dry molding, construction fast, smooth surface after construction, can effectively reduce the tundish working layer material on the molten steel pollution. The product does not add water during construction, which can greatly shorten the time required for tundish baking, thereby reducing fuel consumption. The service life of magnesium dry material is more than 24 hours, and the service life of magnesium calcium dry material is more than 12 hours. Environmentally friendly magnesium dry vibrating material is characterized by strong slag erosion resistance, no irritating gas during baking, environmental protection, no carbon or hydrogen increase in molten steel during use, and clean molten steel. The material has been used in many steel mills, the effect is remarkable.
View more
MgO and MgO-CaO series Spray Grouts
Series of magnesia and magnesia-calcium coatings for tundish are mainly made of high-quality magnesia and magnesia-calcium sand. It is suitable for spraying or smearing, with high service life, strong disintegration, easy to dismantle, which is conducive to purifying molten steel and reducing the pollution of refractory materials to molten steel. It is the choice of lining material for pouring special steel and high purity steel.
View more
Quartz Non-stick Aluminum Castable Refractory for Aluminum Melting Furnace
The quartz non-stick aluminum castable is made of fused quartz as the main raw material, adding an appropriate amount of anti-seepage agent, which has a strong anti-seepage effect on Zn, Cu, Mg and Al in aluminum alloy. The castable has the characteristics of good volume stability, good anti-seepage performance and high strength, and is suitable for use in the contact part of aluminum flow tank and aluminum liquid.
View more
High alumina non-stick aluminum castable refractory for aluminum melting furnace
The high-aluminum non-stick aluminum castable has the characteristics of convenient construction, good anti-seepage effect, high strength, wear resistance, long life, etc., and has good anti-seepage effect on Zn, Cu, Mg and Al in aluminum alloy. It is an essential material for aluminum melting furnace, holding furnace, flow aluminum tank and other equipment.
View more
Al₂O₃-SiC castables for copper, nickel, lead and zinc melting
The aluminum silicon carbide castable developed by our company has the characteristics of erosion resistance, erosion resistance and long life, and is widely used in copper, nickel iron, lead zinc and high ice nickel chute.
View more
High-strength castable for ferronickel rotary kiln
The high-strength castable for nickel-iron rotary kiln has the characteristics of convenient construction, good anti-seepage effect, high strength, wear resistance and long life, and has good anti-seepage effect on Zn, Cu, Mg and Al in aluminum alloy. It is an essential material for equipment such as aluminum melting furnace, heat preservation furnace and flow aluminum tank.
View more
Light weight castables&Spray Grouts
The volume density and thermal conductivity of this series of light castables are serialized, which is convenient to select according to different use positions and conditions. They have been widely used in thermal insulation lining of hot air main pipe, hot air branch pipe and surrounding pipe of blast furnace and hot air furnace, side wall and bottom cover of coke oven and cooling annealing furnace, thermal insulation lining of lime kiln head cover, with good high temperature performance, low thermal conductivity and better thermal insulation performance. Can be poured, smeared and sprayed construction, high adhesion rate, construction rebound rate is low.
View more
The series of press-in materials developed by our company are composed of refractory aggregate, powder, binder and admixture. When used, water or liquid binder is added to reconcile, and there are two series of water and no water. This series of press-in materials are suitable for lining grout lining of large smelting equipment such as ironmaking blast furnaces, hot blast stoves and thermal pipelines. The pressed material has good fluidity, can be well filled in the gap between the furnace shell and the cooling wall, and repair the damaged part of the furnace lining, so as to protect the furnace lining and prolong the service life of the furnace lining. High alumina press-in material is suitable for lining maintenance after the blast furnace cooling wall refractory material spalling, silicon carbide-carbon press-in material is used for the blast furnace tuyere and cooling plate parts of the press-in maintenance, carbon press-in material is used for the blast furnace hearth, iron mouth and other parts of the press-in maintenance.
View more
Low creep high alumina brick for hot blast stove
Low creep high alumina brick for hot blast stove with high quality bauxite clinker as the main raw material, plus mullite, andalusite, sillimanite, by optimizing the matrix, improve the microstructure of the products, by high pressure molding, high temperature sintering, the product has good high temperature creep resistance, excellent thermal shock resistance, is the choice of large and medium-sized hot blast stove materials.
View more
Castables for working lining of main runners
Our company has the capacity of EPC projects for the design, construction and maintenance of the cast house , and the refractory materials for the cast house developed have the characteristics of good high temperature wear resistance, good slag resistance, strong slag-resistant iron erosion ability and high iron flow. The product has been widely used in Hebei Jingye Steel Plant, Jiuquan Steel and other steel companies on large blast furnaces.
View more
In order to reduce carbon pollution in the smelting process of low-carbon steel and ultra-low-carbon steel, the corundum spinel carbon-free ladle precast block developed by our company is made of tabular corundum, high-purity spinel, alumina micropowder, etc. as the main raw materials, using ultrafine powder technology, adding nano-materials, and produced by high-pressure molding process or pouring prefabrication. It has the characteristics of suitable strength, excellent slag resistance and spalling resistance, good thermal shock stability, and long service life. On-site masonry can avoid the problem of winter construction freezing, and at the same time achieve the purpose of prolonging the life of the ladle and not polluting the molten steel. Suitable for large refining ladle wall and LF refining ladle outside the working lining.
View more
Integral argon blowing spray gun
Based on the principle of close packing, the whole argon blowing spray gun is made of ultra-fine powder and high-efficiency compound additives, which has the characteristics of high strength and good thermal shock stability. This series of integral argon blowing guns can be used for ladle top blowing argon alone, and can also work with ladle bottom blowing argon gas permeable brick system, which has obvious improvement on ladle smelting efficiency and molten steel quality.
View more
Products
Refractories
Contact Us
WhatsApp : +86 19143919677
Mobile / Wechat: +86 19143919677
E-mail: biting@jzjxht.com
Address: No. 688, Guangxing Road Boai County, Jiaozuo City, Henan Province
Copyright © Jiaozuo Jinxin Hengtuo Advanced Material Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
