Blast furnace,hot blast furnace


Al₂O₃-SiC bricks for iron ladle

With high bauxite, corundum, silicon carbide, flake graphite as the main raw material, adding part of the admixture to improve the brick's corrosion resistance and spalling resistance, improve the thermal shock stability of the product, has excellent resistance to molten iron scour ability. Suitable for hot metal ladle and torpedo tank work lining.
View more

Thermal shock resistant low creep mullite composite brick

Our company selects high-grade raw materials such as mullite, sanshi minerals and low expansion minerals, and adds anti-thermal shock additives. The products produced have the advantages of good thermal shock performance, high soft temperature and low creep rate. They are widely used in parts with frequent thermal transformation in hot blast stoves, such as contact pipes, air mixing chambers, hot blast stove outlets and inlets, and are well received by users.
View more

Sillimanite brick, andalusite brick

Sillimanite brick, andalusite brick is in high alumina brick ingredients to add a certain proportion of sillimanite or andalusite and other trace elements made of products, also known as three stone products.
View more

Water free taphole clay for blast furnace

Blast furnace anhydrous stemming with high quality aluminum clinker, silicon carbide and clay as the main raw material, the introduction of special additives, the use of composite binding agent. Easy to hit mud, the qualified rate of iron mouth depth is more than 98%; Short time for gun withdrawal; Easy to open, one-time opening rate reaches more than 98%; Mushroom head can be formed in the furnace cylinder, which is beneficial to protect the furnace cylinder. Slag iron has good corrosion resistance, erosion resistance, slow reaming and long tapping time.
View more

Castables for slag runner of blast furnace

Blast furnace slag ditch castable has the characteristics of high strength, strong erosion resistance to iron slag and long service life.
View more

Castables for tilting runner of cast house

The use of dense corundum, corundum, silicon carbide as the main raw material, adding a special antioxidant, ultra-fine powder combination. The material has good construction performance, good thermal shock stability, good resistance to molten iron and slag erosion ability, non-stick slag iron, easy to disintegrate.
View more

Light weight castables&Spray Grouts

The volume density and thermal conductivity of this series of light castables are serialized, which is convenient to select according to different use positions and conditions. They have been widely used in thermal insulation lining of hot air main pipe, hot air branch pipe and surrounding pipe of blast furnace and hot air furnace, side wall and bottom cover of coke oven and cooling annealing furnace, thermal insulation lining of lime kiln head cover, with good high temperature performance, low thermal conductivity and better thermal insulation performance. Can be poured, smeared and sprayed construction, high adhesion rate, construction rebound rate is low.
View more

Injection mass

The series of press-in materials developed by our company are composed of refractory aggregate, powder, binder and admixture. When used, water or liquid binder is added to reconcile, and there are two series of water and no water. This series of press-in materials are suitable for lining grout lining of large smelting equipment such as ironmaking blast furnaces, hot blast stoves and thermal pipelines. The pressed material has good fluidity, can be well filled in the gap between the furnace shell and the cooling wall, and repair the damaged part of the furnace lining, so as to protect the furnace lining and prolong the service life of the furnace lining. High alumina press-in material is suitable for lining maintenance after the blast furnace cooling wall refractory material spalling, silicon carbide-carbon press-in material is used for the blast furnace tuyere and cooling plate parts of the press-in maintenance, carbon press-in material is used for the blast furnace hearth, iron mouth and other parts of the press-in maintenance.
View more

Low creep high alumina brick for hot blast stove

Low creep high alumina brick for hot blast stove with high quality bauxite clinker as the main raw material, plus mullite, andalusite, sillimanite, by optimizing the matrix, improve the microstructure of the products, by high pressure molding, high temperature sintering, the product has good high temperature creep resistance, excellent thermal shock resistance, is the choice of large and medium-sized hot blast stove materials.
View more

Castables for working lining of main runners

Our company has the capacity of EPC projects for the design, construction and maintenance of the cast house , and the refractory materials for the cast house developed have the characteristics of good high temperature wear resistance, good slag resistance, strong slag-resistant iron erosion ability and high iron flow. The product has been widely used in Hebei Jingye Steel Plant, Jiuquan Steel and other steel companies on large blast furnaces.
View more
< 1 >