Stock code
839391
language
Products
Dry ramming mass for induction furnace lining
The product is composed of high-purity corundum and magnesia in a specific ratio. The special mixing process ensures the uniform structure and stable performance of the material. In the process of use, the surface of the material is reacted and sintered to form a dense corundum spinel layer, which gives the material high resistance to erosion and excellent resistance to molten steel penetration. The back of the dense layer is an unreacted loose layer, which can effectively absorb the stress of thermal shock production and give the material high resistance to thermal spalling.
View more
Medium frequency induction furnace repairing mixes
The product has outstanding surface spalling resistance and good resistance to metal and slag erosion at high temperatures. The product has excellent adhesion and the construction operation is very simple. Widely used in medium frequency induction furnace and casting transfer package of cold and hot state repair.
View more
Lightweight and heavy intermediate package cover castable can be configured according to customer requirements, which has the characteristics of good thermal insulation performance, high strength, no peeling, no deformation and long service life. Can be cast or prefabricated according to customer requirements.
View more
Castable for permanent lining of tundish
Through the reasonable selection of raw materials and particle size distribution, and the introduction of ultra-fine powder and high-efficiency dispersant, the self-flowing castable for heating furnace is developed. The self-flowing castable has the characteristics of convenient construction, good volume stability and good thermal shock stability, and is suitable for use in complex shapes and narrow spaces.
View more
MgO and MgO-CaO series dry spray grouts
The product dry molding, construction fast, smooth surface after construction, can effectively reduce the tundish working layer material on the molten steel pollution. The product does not add water during construction, which can greatly shorten the time required for tundish baking, thereby reducing fuel consumption. The service life of magnesium dry material is more than 24 hours, and the service life of magnesium calcium dry material is more than 12 hours. Environmentally friendly magnesium dry vibrating material is characterized by strong slag erosion resistance, no irritating gas during baking, environmental protection, no carbon or hydrogen increase in molten steel during use, and clean molten steel. The material has been used in many steel mills, the effect is remarkable.
View more
MgO and MgO-CaO series Spray Grouts
Series of magnesia and magnesia-calcium coatings for tundish are mainly made of high-quality magnesia and magnesia-calcium sand. It is suitable for spraying or smearing, with high service life, strong disintegration, easy to dismantle, which is conducive to purifying molten steel and reducing the pollution of refractory materials to molten steel. It is the choice of lining material for pouring special steel and high purity steel.
View more
Quartz Non-stick Aluminum Castable Refractory for Aluminum Melting Furnace
The quartz non-stick aluminum castable is made of fused quartz as the main raw material, adding an appropriate amount of anti-seepage agent, which has a strong anti-seepage effect on Zn, Cu, Mg and Al in aluminum alloy. The castable has the characteristics of good volume stability, good anti-seepage performance and high strength, and is suitable for use in the contact part of aluminum flow tank and aluminum liquid.
View more
High alumina non-stick aluminum castable refractory for aluminum melting furnace
The high-aluminum non-stick aluminum castable has the characteristics of convenient construction, good anti-seepage effect, high strength, wear resistance, long life, etc., and has good anti-seepage effect on Zn, Cu, Mg and Al in aluminum alloy. It is an essential material for aluminum melting furnace, holding furnace, flow aluminum tank and other equipment.
View more
Al₂O₃-SiC castables for copper, nickel, lead and zinc melting
The aluminum silicon carbide castable developed by our company has the characteristics of erosion resistance, erosion resistance and long life, and is widely used in copper, nickel iron, lead zinc and high ice nickel chute.
View more
High-strength castable for ferronickel rotary kiln
The high-strength castable for nickel-iron rotary kiln has the characteristics of convenient construction, good anti-seepage effect, high strength, wear resistance and long life, and has good anti-seepage effect on Zn, Cu, Mg and Al in aluminum alloy. It is an essential material for equipment such as aluminum melting furnace, heat preservation furnace and flow aluminum tank.
View more
Light weight castables&Spray Grouts
The volume density and thermal conductivity of this series of light castables are serialized, which is convenient to select according to different use positions and conditions. They have been widely used in thermal insulation lining of hot air main pipe, hot air branch pipe and surrounding pipe of blast furnace and hot air furnace, side wall and bottom cover of coke oven and cooling annealing furnace, thermal insulation lining of lime kiln head cover, with good high temperature performance, low thermal conductivity and better thermal insulation performance. Can be poured, smeared and sprayed construction, high adhesion rate, construction rebound rate is low.
View more
The series of press-in materials developed by our company are composed of refractory aggregate, powder, binder and admixture. When used, water or liquid binder is added to reconcile, and there are two series of water and no water. This series of press-in materials are suitable for lining grout lining of large smelting equipment such as ironmaking blast furnaces, hot blast stoves and thermal pipelines. The pressed material has good fluidity, can be well filled in the gap between the furnace shell and the cooling wall, and repair the damaged part of the furnace lining, so as to protect the furnace lining and prolong the service life of the furnace lining. High alumina press-in material is suitable for lining maintenance after the blast furnace cooling wall refractory material spalling, silicon carbide-carbon press-in material is used for the blast furnace tuyere and cooling plate parts of the press-in maintenance, carbon press-in material is used for the blast furnace hearth, iron mouth and other parts of the press-in maintenance.
View more
Products
Refractories
Contact Us
WhatsApp : +86 19143919677
Mobile / Wechat: +86 19143919677
E-mail: biting@jzjxht.com
Address: No. 688, Guangxing Road Boai County, Jiaozuo City, Henan Province
Copyright © Jiaozuo Jinxin Hengtuo Advanced Material Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
