Stock code
839391
language
The heat storage ball produced by our company has the characteristics of low shrinkage rate of re-burning line, high load softening temperature and strong corrosion resistance, especially in the process of heat storage burner change, the temperature drops rapidly and rises in the environment, the thermal shock stability is good, the amount of heat storage is large, and the occurrence of thermal shock crushing reduces ventilation or blocks the channel.
View more
Magnesia Carbon (MgO-C) Bricks for EAF
The electric furnace magnesia carbon brick series is designed and manufactured by our company according to the different parts and different conditions of use of the electric furnace. It uses high purity and high density fused magnesia or large crystalline fused magnesia, high purity graphite and so on as the main raw materials, adds special antioxidants, uses phenolic resin as binder, and is formed by high pressure.
View more
The electric furnace cover and refining furnace cover developed by our company are made of high-quality raw materials, using ultra-fine powder combination technology, adding high-efficiency additives, and optimizing the particle size composition. There are three kinds of andalusite, corundum and chrome corundum. It has the characteristics of good thermal shock stability, corrosion resistance and long service life. Strong resistance to arc radiation, excellent resistance to steel slag and furnace CO, CO₂, SO gas erosion ability. Suitable for ordinary electric furnace, ultra-high power electric furnace, LF refining furnace and VD furnace use.
View more
Dry ramming mass for EAF bottom
Electric furnace bottom dry ramming material series is based on the principle of the most closely packed particles, the selection of high-quality synthetic raw materials and additives, binding agents prepared, with strong resistance to molten steel permeability, erosion resistance, easy sintering, high bulk density, convenient construction and other characteristics, is the ideal material for HP, UHP electric furnace bottom use.
View more
The electric furnace spraying material series developed by our company is made of high-quality heavy burned magnesia sand and other alkaline composite materials, mixed with special composite binders and additives through reasonable particle size composition. Good sintering, strong slag resistance, and the rebound rate is small, high adhesion rate, easy to spray repair operation. Can be widely used in the hot zone of electric furnace, ultra-high power electric furnace, slag line, furnace slope, side wall, tapping port and other parts of the hot repair, is to make the furnace lining to achieve uniform erosion, improve the life of the ideal supporting materials.
View more
Using mullite or microporous mullite as the main raw material, the use of micro-powder combination, the product has the advantages of anti-spalling, good thermal shock stability, high temperature resistance, long service life and so on.
View more
The Sliding Plate produced by our company is mainly made of sintered tabular corundum, zirconium corundum and zirconium mullite. It adopts composite antioxidants and introduces metal aluminum powder and magnesium aluminum alloy.
View more
Wet spraying castables for torpedo tank
The self-flowing castable developed by using super high aluminum, fused corundum and silicon carbide as the main raw materials has good fluidity, no mold is needed during construction, and there is no dust pollution on the construction site. Construction speed block, saving construction time; The sprayed material has fast hardening and high strength, and the material has good erosion resistance and erosion resistance.
View more
Aluminum silicon carbide bricks for iron ladle
High bauxite, corundum, silicon carbide, flake graphite as the main raw material, adding some additives to improve the brick's corrosion resistance and spalling resistance, improve the thermal shock stability of the product, has excellent resistance to molten iron erosion ability. Suitable for lader work lining.
View more
Refractory materials for molten iron ladle mainly consider the erosion of molten iron and reduce the temperature drop of molten iron. The use of specially developed castable pouring, the use of temperature does not shrink, high strength;
View more
Desulfurization spray gun&KR desulfurization mixer
Physical and chemical indexes of desulfurization spray gun and KR stirring head
View more
The refractory material is made of mullite as the main raw material. With high mechanical strength and good thermal shock, wear resistance and other properties, mainly used as boiler, blast furnace and hot blast stove, reheating furnace, ceramic kiln and other kiln lining body.
View more
Products
Refractories
Contact Us
WhatsApp : +86 19143919677
Mobile / Wechat: +86 19143919677
E-mail: biting@jzjxht.com
Address: No. 688, Guangxing Road Boai County, Jiaozuo City, Henan Province
Copyright © Jiaozuo Jinxin Hengtuo Advanced Material Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
