Castables for steel ladle working lining
Classification:
Product Introduction
The refractory castable for the ladle working layer produced by our company is made of corundum, high-purity magnesium aluminum spinel and fused magnesia as the main raw materials, and is made of micro-powder combination technology and admixture. It has the characteristics of good construction performance, high strength, good volume stability, good erosion resistance, erosion resistance and thermal shock resistance, and is suitable for pouring large and medium-sized ladle walls. At the same time, combined with the characteristics of the use of castable, ladle working lining peeling sleeve pouring construction technology, not only makes the ladle's service life is greatly improved, but also significantly reduces the ladle working lining refractory material consumption, so that the ladle's ton steel refractory material consumption and cost reached the advanced level.
Physical and chemical indexes of castable for ladle working layer
| Item | JH-AM80 | JH-AM90 | JH-AM92 | |
| Chemical composition ( % ) ; ≥ | Al₂O₃+MgO | 80 | 90 | 92 |
| Bulk Density (g/cm³);≥ | 2.8 | 2.9 | 2.95 | |
| Cold compressive strength (MPa);≥ | 110 ℃× 16h | 30 | 30 | 30 |
| 1550 ℃× 3h | 50 | 60 | 70 | |
| Permanent linear change on heating (%) | 1550 ℃× 3h | -0.2~+2.0 | -0.2~+1.5 | -0.2~+1.5 |
| Use | Medium and small ordinary lades working lining | Large and medium-sized ordinary lader working lining | Large Refining Ladle Working Liner | |
Packing method: woven bag packing; Specifications 1000 kg/bag, 50 kg/bag, 25 kg/bag
Note: pay attention to moisture, such as caking, do not use
Shelf life: 6 months
Key words:
Ladle working layer castable
Previous:
Related Products
Product inquiry








